Inverters

12 V inverters, remote control included

Remote control included 230 V AC power for commercial vehicles, mobile workshops and body builders. Search by voltage and continuous power (24V 2000W) or a comparable model number. Prices exclude VAT; sold individually.

Results

All inverter articles A-Z
All inverter articles A-ZEight articles, supplied individually4

Which inverter do I need?

12 V or 24 V?

Match the inverter input to the vehicle battery system. Trucks, buses and heavy commercial vehicles usually use 24 V; vans and service vehicles often use 12 V. Check the actual vehicle.

Continuous power and starting current

Add the continuous consumption of devices running together. As a planning rule, allow around 20-30% headroom. Motors and compressors may need substantially more starting power; check their requirements and the inverter manual. No surge rating is specified for these models.

Why pure sine wave?

Pure sine wave output is suitable for electronics, chargers, electronically controlled tools and motor-driven appliances within their electrical requirements. Modified sine wave output may cause interference or additional heating in some loads.

Battery current and installation

2000 W / 24 V is about 83 A before losses; at 12 V it is about 167 A. Actual input current is higher because of conversion losses. Use short, adequately sized battery cables and an appropriate main fuse close to the battery. Follow the manual and a qualified installer for exact sizing.

Remote control included

An inverter may be fitted behind a seat, in a storage compartment or in the vehicle body. The included remote control lets you switch it on and off without reaching the inverter. Do not obstruct the ventilation required by its manual.

Indicative input current, before conversion losses

Continuous power12 V24 V
1500 W125 A63 A
2000 W167 A83 A
2500 W208 A104 A
3000 W250 A125 A

Calculated as P/U, rounded to the nearest ampere. Actual current is higher. These values are not cable or fuse ratings.

Professional vehicle applications

Truck cabCoffee machine, microwave or laptop, with simultaneous and starting loads checked.
Service vehiclesChargers and tools for mobile workshops.
Body building230 V power integrated into a vehicle body or service installation.
Agriculture and machineryPower for suitable equipment around vehicles and machines.

FAQ

Which input voltage do I choose?

Choose 12 V or 24 V to match the actual vehicle battery system. Never connect a 12 V inverter to a 24 V supply.

How much continuous power do I need?

Add the simultaneous continuous loads and normally allow 20-30% planning headroom. Check motor and compressor starting requirements separately against the manual.

Pure or modified sine wave?

Pure sine wave is suited to many electronic and motor loads within their ratings. Modified sine wave can cause interference or heating with some devices.

Which cable and main fuse?

Use the inverter manual and the installation conditions to select cable cross-section and fuse. Fit the appropriate main fuse close to the battery; consult a qualified installer.

How is it supplied and invoiced?

Inverters are sold per piece. Displayed business prices exclude VAT. Availability and delivery time are confirmed with your quotation.

Is the remote control included?

Yes. A remote control is included with all eight models, so you can switch the inverter on and off when it is installed out of reach.

Get a quote

Inverters for a fleet or body-building series?

Send your voltage, continuous loads, quantities and delivery requirements for a project quotation.