12 V or 24 V?
Match the inverter input to the vehicle battery system. Trucks, buses and heavy commercial vehicles usually use 24 V; vans and service vehicles often use 12 V. Check the actual vehicle.

Inverters
Remote control included 230 V AC power for commercial vehicles, mobile workshops and body builders. Search by voltage and continuous power (24V 2000W) or a comparable model number. Prices exclude VAT; sold individually.
Results
Match the inverter input to the vehicle battery system. Trucks, buses and heavy commercial vehicles usually use 24 V; vans and service vehicles often use 12 V. Check the actual vehicle.
Add the continuous consumption of devices running together. As a planning rule, allow around 20-30% headroom. Motors and compressors may need substantially more starting power; check their requirements and the inverter manual. No surge rating is specified for these models.
Pure sine wave output is suitable for electronics, chargers, electronically controlled tools and motor-driven appliances within their electrical requirements. Modified sine wave output may cause interference or additional heating in some loads.
2000 W / 24 V is about 83 A before losses; at 12 V it is about 167 A. Actual input current is higher because of conversion losses. Use short, adequately sized battery cables and an appropriate main fuse close to the battery. Follow the manual and a qualified installer for exact sizing.
An inverter may be fitted behind a seat, in a storage compartment or in the vehicle body. The included remote control lets you switch it on and off without reaching the inverter. Do not obstruct the ventilation required by its manual.
| Continuous power | 12 V | 24 V |
|---|---|---|
| 1500 W | 125 A | 63 A |
| 2000 W | 167 A | 83 A |
| 2500 W | 208 A | 104 A |
| 3000 W | 250 A | 125 A |
Calculated as P/U, rounded to the nearest ampere. Actual current is higher. These values are not cable or fuse ratings.
Choose 12 V or 24 V to match the actual vehicle battery system. Never connect a 12 V inverter to a 24 V supply.
Add the simultaneous continuous loads and normally allow 20-30% planning headroom. Check motor and compressor starting requirements separately against the manual.
Pure sine wave is suited to many electronic and motor loads within their ratings. Modified sine wave can cause interference or heating with some devices.
Use the inverter manual and the installation conditions to select cable cross-section and fuse. Fit the appropriate main fuse close to the battery; consult a qualified installer.
Inverters are sold per piece. Displayed business prices exclude VAT. Availability and delivery time are confirmed with your quotation.
Yes. A remote control is included with all eight models, so you can switch the inverter on and off when it is installed out of reach.
Get a quote
Send your voltage, continuous loads, quantities and delivery requirements for a project quotation.