Adhesive-lined heat-shrink tubing 6 → 2 mm, 3:1 · roll 5 m
CR-EL-002902ConnectorRoute article

Adhesive-lined heat-shrink tubing 6 → 2 mm, 3:1 · roll 5 m

Business price · excl. VAT
€14.05/ roll 5 m

€2.81 per metre

Incl. 21% VAT€17.00roll 5 m

Sold per roll 5 m

In stock — ships within 1 week
Free shipping from €500 · below that €25 flat
1

Rather request a quote?

ConnectorRoute is the supplier of this article. Brand names and article numbers of other manufacturers are used for identification only.

Shrink ratio3:1
Adhesive liningyes
Suitable cable / bundle Ø2–4.8 mm
Sales unitroll 5 m

Same order

Same size with or without adhesive, box or roll, matching cable and accessories.

Cross-reference

Cross-reference numbers

Comparable articles of other manufacturers, matched on expanded and recovered diameter, shrink ratio and adhesive. This article is an alternative to the numbers below; the numbers are for identification only.

BrandCompatible with / alternative to
TE Connectivity RaychemATUM-6/2 DWFR-6/2-0-STK EH2289-000 DWFR-6/2-0-SP EK3183-000
HellermannTytonTAN32-6/2 HIS-A-6/2-PO-X-BK 308-10600 EPS-300-6/2-PO-X-BK 340-06020
DSG-CanusaDERAY-PROTECT 6/2 DERAY-IAKT 3:1 6/2 CR LENGTH A 1,22 M 6110060013
Würth0771006402 0771006400
Same size in our catalogue (short pieces)CR-EL-000859 CR-EL-000866 CR-EL-000873 CR-EL-002642 CR-EL-002644

Application

Where it is used

Adhesive-lined heat-shrink tubing 6 → 2 mm, 3:1

For connections that see water, salt and vibration: trailer lighting, under-body wiring, agricultural and construction machinery. The 3:1 ratio covers a connector body and still shrinks tight onto a thin cable; the adhesive seals the joint and acts as strain relief.

Which heat-shrink do I need?

The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.

Questions about this article

How is this article sold?

Per roll 5 m, excl. VAT. You order whole sales units; the price per metre or per piece is shown for comparison.

Which size do I need?

The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.

Is this an original article of the brands in the cross-reference table?

No. ConnectorRoute supplies this article as a compatible alternative. Other manufacturers' numbers are shown so you can find the right size; they are used for identification only.

Technical specifications

Technical data

Article number
CR-EL-002902
Product type
Adhesive-lined heat-shrink (waterproof)
Ø before shrinking (expanded)
6 mm
Ø after shrinking (recovered)
2 mm
Shrink ratio
3:1
Adhesive lining
yes
Colour
not stated
Length per sales unit
5 m
Suitable cable / bundle Ø (guide value)
2–4.8 mm
Material
Polyolefin
Operating temperature
−55 … +125 °C (typical)
Sales unit
roll 5 m
€14.05roll 5 m