€6.39 / dispenser box 2.5 m
CR-EL-002904ConnectorRoute article
Adhesive-lined heat-shrink tubing 12 → 4 mm, 3:1 · roll 3 m
Business price · excl. VAT
€9.58/ roll 3 m
€3.19 per metre
Incl. 21% VAT€11.59roll 3 m
Sold per roll 3 m
In stock — ships within 1 week
Free shipping from €500 · below that €25 flat
1
ConnectorRoute is the supplier of this article. Brand names and article numbers of other manufacturers are used for identification only.
Shrink ratio3:1
Adhesive liningyes
Suitable cable / bundle Ø4–9.6 mm
Sales unitroll 3 m
Same order
Frequently ordered together
Same size with or without adhesive, box or roll, matching cable and accessories.
€6.39 / dispenser box 2.5 m
€4.89 / roll 5 m
€14.43 / roll 5 m
€14.05 / roll 5 mCross-reference
Cross-reference numbers
Comparable articles of other manufacturers, matched on expanded and recovered diameter, shrink ratio and adhesive. This article is an alternative to the numbers below; the numbers are for identification only.
| Brand | Compatible with / alternative to |
|---|---|
| TE Connectivity Raychem | ATUM-12/4 DWFR-12/4-0-STK EH2291-000 |
| HellermannTyton | TAN32-12/4 HIS-A-12/4-PO-X-BK 308-11200 EPS-300-12/4-PO-X-BK 340-12040 |
| DSG-Canusa | DERAY-IAKT 3:1 12/4 BK LENGTH A 1,22 M |
| Würth | 0771012700 |
| Same size in our catalogue (short pieces) | CR-EL-000861 CR-EL-000869 CR-EL-000874 CR-EL-000875 CR-EL-002643 CR-EL-002646 |
Application
Where it is used
Adhesive-lined heat-shrink tubing 12 → 4 mm, 3:1
For connections that see water, salt and vibration: trailer lighting, under-body wiring, agricultural and construction machinery. The 3:1 ratio covers a connector body and still shrinks tight onto a thin cable; the adhesive seals the joint and acts as strain relief.
Which heat-shrink do I need?
The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.
Questions about this article
How is this article sold?
Per roll 3 m, excl. VAT. You order whole sales units; the price per metre or per piece is shown for comparison.
Which size do I need?
The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.
Is this an original article of the brands in the cross-reference table?
No. ConnectorRoute supplies this article as a compatible alternative. Other manufacturers' numbers are shown so you can find the right size; they are used for identification only.
Technical specifications
Technical data
- Article number
- CR-EL-002904
- Product type
- Adhesive-lined heat-shrink (waterproof)
- Ø before shrinking (expanded)
- 12 mm
- Ø after shrinking (recovered)
- 4 mm
- Shrink ratio
- 3:1
- Adhesive lining
- yes
- Colour
- not stated
- Length per sales unit
- 3 m
- Suitable cable / bundle Ø (guide value)
- 4–9.6 mm
- Material
- Polyolefin
- Operating temperature
- −55 … +125 °C (typical)
- Sales unit
- roll 3 m