€6.30 / dispenser box 5 m
CR-EL-002901ConnectorRoute article
Adhesive-lined heat-shrink tubing 24 → 8 mm, 3:1, black · dispenser box 1.5 m
Business price · excl. VAT
€7.62/ dispenser box 1.5 m
€5.08 per metre
Incl. 21% VAT€9.22dispenser box 1.5 m
Sold per dispenser box 1.5 m
In stock — ships within 1 week
Free shipping from €500 · below that €25 flat
1
ConnectorRoute is the supplier of this article. Brand names and article numbers of other manufacturers are used for identification only.
Shrink ratio3:1
Adhesive liningyes
Suitable cable / bundle Ø8–19.2 mm
Sales unitdispenser box 1.5 m
Same order
Frequently ordered together
Same size with or without adhesive, box or roll, matching cable and accessories.
€6.30 / dispenser box 5 m
€8.21 / piece
€7.47 / dispenser box 2 m
€6.39 / dispenser box 2.5 mCross-reference
Cross-reference numbers
Comparable articles of other manufacturers, matched on expanded and recovered diameter, shrink ratio and adhesive. This article is an alternative to the numbers below; the numbers are for identification only.
| Brand | Compatible with / alternative to |
|---|---|
| TE Connectivity Raychem | ATUM-24/8 DWFR-24/8-0-STK EH2293-000 |
| HellermannTyton | TAN32-24/8 HIS-A-24/8-PO-X-BK 308-12400 EPS-300-24/8-PO-X-BK 340-24080 |
| DSG-Canusa | DERAY-IAKT 3:1 24/8 BK LENGTH A 1,22 M |
| Würth | 0771025400 |
| Alpha Wire | FIT-321-1 |
| Same size in our catalogue (short pieces) | CR-EL-000863 CR-EL-000871 CR-EL-000876 |
Application
Where it is used
Adhesive-lined heat-shrink tubing 24 → 8 mm, 3:1, black
For connections that see water, salt and vibration: trailer lighting, under-body wiring, agricultural and construction machinery. The 3:1 ratio covers a connector body and still shrinks tight onto a thin cable; the adhesive seals the joint and acts as strain relief.
Which heat-shrink do I need?
The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.
Questions about this article
How is this article sold?
Per dispenser box 1.5 m, excl. VAT. You order whole sales units; the price per metre or per piece is shown for comparison.
Which size do I need?
The Ø before shrinking must be larger than the thickest part (connector, splice); the Ø after shrinking must be smaller than the thinnest part (cable). The guide value in the technical data shows the cable / bundle range.
Is this an original article of the brands in the cross-reference table?
No. ConnectorRoute supplies this article as a compatible alternative. Other manufacturers' numbers are shown so you can find the right size; they are used for identification only.
Technical specifications
Technical data
- Article number
- CR-EL-002901
- Product type
- Adhesive-lined heat-shrink (waterproof)
- Ø before shrinking (expanded)
- 24 mm
- Ø after shrinking (recovered)
- 8 mm
- Shrink ratio
- 3:1
- Adhesive lining
- yes
- Colour
- black
- Length per sales unit
- 1.5 m
- Suitable cable / bundle Ø (guide value)
- 8–19.2 mm
- Material
- Polyolefin
- Operating temperature
- −55 … +125 °C (typical)
- Sales unit
- dispenser box 1.5 m